Roof sheathing cleaning
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Attic mold almost never comes from a single leak. Call Breffni Remediation and we'll connect you with an independent attic mold pro in Trinity who removes the growth and fixes the airflow problem underneath it.
Most attic growth comes down to three issues: exhaust fans venting into the attic, blocked soffit vents, and air leaks from the house below. Cleaning without fixing them doesn't last.
Answered day and night, holidays too.

Here's what separates a real attic fix from a quick spray job.

The quote separates sheathing cleaning, insulation work, and ventilation corrections, so you know what each fix costs before anyone climbs the ladder.
Dry ice and soda blasting lift growth off roof decking without soaking the wood, and HEPA vacuums and air scrubbers handle the dust and spores that come loose.
Need it done before closing or before new shingles go on? Tell the dispatcher and we'll prioritize your call.
Every independent contractor we connect you with is expected to be properly insured and licensed where required.
Attic work combines cleaning overhead with fixing how air moves through the house. These are the core services.
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Fans and dryer vents that end in the attic get rerouted outside, removing a major moisture source.
Insulation pushed against the eaves can block soffit intake. Baffles restore the air channel, and ridge or roof vents are checked so air flows from low to high.
Removing damaged insulation and sealing the gaps where house air escapes keeps the attic colder and drier.
Once the decking is clean, some contractors apply an antimicrobial or a fungicidal encapsulant coating. It doesn't replace cleaning or ventilation fixes, but it adds a layer of protection.

Four steps, with photos from up top.
Share the inspection notes if you have them so the contractor knows what to look for.
The pro checks the sheathing, ventilation, insulation depth, exhaust duct terminations, and roof penetrations, taking photos along the way.
The quote shows what needs cleaning and what needs fixing so it stays clean.
Decking is cleaned, exhaust routed outside, vents restored, and the job finishes with before-and-after photos you can share with a buyer or insurer.

One free call gets a local attic mold pro to take a look.
Call +1-844-326-4757 Now
Here's what some recent callers shared.

The north slope of our roof deck was covered in dark stains. The contractor found both bathroom fans venting straight into the attic. They dry ice blasted the decking and ran the ducts out through roof caps.
Every winter we'd get water spots on the bedroom ceiling. It turned out to be frost on the nails melting. They cleared the soffits, installed baffles, and sealed around the can lights. No spots this year.
We were about to replace the roof anyway, so the contractor cleaned the sheathing first and coordinated with the roofer on adding a ridge vent. Good timing saved us a second trip.
Photos of the cleaned attic saved our closing. The buyer's agent had questions and the report answered every one of them.
Usually warm, humid air from the house condensing on cold roof sheathing, made worse by exhaust fans venting into the attic, blocked soffit vents, or poor air sealing. Roof leaks are another cause.
Yes. Ongoing moisture can degrade roof sheathing, rust nails, soak insulation, and show up as ceiling stains or odors. It's also commonly flagged during home sales.
Only if the wood is rotted or delaminating. Cleaning handles most attic mold.
It's a method that fires dry ice pellets at the surface to knock off growth. The dry ice turns into gas, leaving no water or grit behind, which suits attic sheathing well.
No. Bath and kitchen exhaust should be ducted all the way outside through a roof or wall cap. Venting into the attic is one of the most common causes of attic mold.
Typically a day or two for cleaning, plus time for ventilation or insulation work.
Ranch homes, two-stories, and older houses with low-slope roofs across Trinity all use the same 24/7 line.
Common Trinity service zip codes include 75862.
Nearby cities we also serve sit in the list below.
Confirm Your Area: +1-844-326-4757